1 / 1
AMT Lightning Magazine Baseplate — image 1

AMT Lightning Magazine Baseplate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

AMT‑inspired baseplate remix with recessed logo and chord texture; prints cleanly in ABS at 0.1 mm.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

AMT‑Inspired Lightning Baseplate (Remix)

A functional, modernized tribute baseplate designed for AMT Lightning magazines. This remix is based on the Public Domain Ruger MKII Magazine Base STL by CheT @CheT_1029040, which explicitly allows sharing, modification, and commercial use. The original file provided a solid dimensional foundation; all top‑side geometry has been redesigned.

What’s Changed in This Remix

  • AMT‑style_logo_recess — Added a recessed AMT‑inspired swirl and lettering, intentionally non‑OEM and slightly underset to prevent wear.

  • Archimedean_Chords_surface — Replaced the flat top with a modern curved‑flow texture that complements the logo and hides layer lines.

  • ABS_friendly_geometry — Adjusted top‑face transitions and recess depth for crisp detail at 0.1 mm layer height.

  • Seam_hiding_behavior — Geometry encourages slicers to bury the seam in an internal corner for a clean exterior.

  • Lightning_mag_fit — Tuned underside tolerances for AMT Lightning magazines while retaining the original STL’s general footprint.

Why This Remix Exists

  • Magazine_identification — Helps differentiate Lightning mags from MK‑series mags at the range.

  • Tribute_not_replica — AMT‑adjacent aesthetic without copying OEM tooling or trademarks.

  • Range_ready_design — Recessed lettering stays crisp; top face takes the wear.

  • Print_efficiency — Prints in ABS for about six cents of material.

Included Files

  • Remix_STL — Clean, printable geometry with recessed logo and chord texture.

  • Core_One_plus_GCODE — Optional: fully sliced 0.1 mm ABS file with ironing enabled for a satin, molded‑polymer finish.

Print Recommendations

Each item begins with a Guided Link.

  • 0.1_mm_layers — Captures fine detail in the logo and background texture.

  • Ironing_enabled — Produces a smooth, OEM‑adjacent top face.

  • ABS_or_ASA — Best balance of strength, finish, and heat resistance.

  • 6_perimeters — Provides rigidity without excess material.

  • 50% Combined Infill,  — Provides strength without wasting material

Tags