Switch 2 Horizontal Dock Stand w/ StarFox Logo or No Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Originally designed by Fosser2 as a stand to place the Switch 2 dock horizontally at an angle, easier for tight spaces.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modified Fosser2's revision2 model to leave more open space underneath where additional material may not be necessary, added an open channel going across just in case there might be any heat build up on the underside, and also added two alternative logo options: No logo (blank), and Star Fox team logo.
If you choose the Star Fox team logo version, you can choose to print a separate piece in a different color like I did, or just skip that and keep only the inset logo on the main piece. But I also included the file with no logo at all for a clean aesthetic.
Before printing I simply arranged the piece so it laid flat on the build plate (place on face). I also enabled support on build plate only for the circular channels, but that might not be necessary. I printed the star fox logo separately with the visible side facing down on the build plate so it would be more smooth.
On mine I didn't even need to glue the Fox logo in, it sits inside nicely, so I printed a couple colors that I can swap out on a whim. But you might want/need to glue yours if you choose. No logo version also available.