Hanging tissue box holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for multiple sized tissue boxes, compatible with IKEA Tisken hooks
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
These boxes take up too much space in the window sill, so I decided to hang them up. The design is very simple, it's just a box, but sized to fit the tissue boxes I have perfectly. Tissue boxes should be about 117mm wide, and 43-93mm tall (which is the depth of this holder). You can adjust the depth of the box with the separately printable slide flap, you can slide that into any of the slots. If you are using a 93mm tall box, there's a slot at the very back for the flap for storage so it isn't taking space elsewhere.
Print settings
I suggest a Structural profile for nice vertical corners
Enable supports on build plate for the Tisken hook only
I printed without a brim and the corner bent up a bit, so I also suggest using a brim if you bed adhesion isn't perfect.