Kawasaki Ninja Turn Signal Stalk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear turn signal stalk for 2015 Kawasaki Ninja 1000 (ZX1000). May fit other models as well. P5152 marking on original.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Both of my rear turn signal rubber stalks (stems) on my 2015 Ninja 1000 motorcycle cracked and bent over while on an extended trip (duct tape was used extensively). Kawasaki only sells the complete turn signal assemblies as part numbers 23037-0184 and 23037-0185 for ~US$65/ea, but only the rubber was broken. The rubber is part is stamped with "P5152" and "S3". I've found references to the Versys, KLR650, KLE650, Z750, and ZX-10R using the same rubber part, and probably more (possibly the ER6-N). This should be much more durable than the original due to the thickness.
I found a couple of similar models online before I decided to design my own, but they each had dealbreakers:
Ninja Turn Signal: Missing retention tabs for locking washer, making the locking washer ineffective. Seems to require inner supports. Must be printed bike-side down (that probably makes outside print a bit nicer though).
Kawasaki ER6-N Turn Signal Holder: Has locking tabs but requires multiple supports due to lack of fillets.
Neither quite matched the original size / shape of mine but were pretty close.
MUST be printed in a flexible filament. I used EONO3D Black Matte TPU 95A. I printed the first stalk with 4 walls and 95% infil and it was a bit stiff, so I used 80% infil for the second.
I attached some pictures during reassembly in case anyone needs a reminder of how to put it back together.
Note that the pictured model was printed a bit too fast and has some minor cosmetic defects as I was expecting to need to tweak it and print a v2. However, it worked as originally designed so I used it.