1 / 8
V-ION / VIRTU - EBB36 mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount and ducting angled by 10 degrees to allow room for an EBB36 v1.2 with usage of Dupont connectors on a Virtu E3.
Almost no loss in Y axis, allowing for 230mm of travel.
Everything is installed as designed by RH3D with the original hardware.
You will need to delicately pry the arms of the fan mount to position them around the CAN board.
The EBB36 might be touching the extruder's stepper motor, so you will have to isolate the backside of the stepper to prevent shorting. I used Kapton tape by precaution.