1 / 6
Cello webOS TV Remote Holster — VHB Tape Mount (fits LG AKB756xx remotes) — zdjęcie 1
1 / 6

Cello webOS TV Remote Holster — VHB Tape Mount (fits LG AKB756xx remotes)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall-mount holster for the Cello webOS / LG AKB-shell remote. Funnel mouth, one-hand draw, recessed 19mm tape channel. M

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Cello's 12V Traveller webOS TVs are everywhere in caravans and motorhomes, but the remote gets no home — it lives on the sofa, the floor, or under the sofa. Searched all the usual sites: holders exist for the old Vesten-style caravan remotes and LG's Magic Remote, but nothing for this shell. So here's one, traced from the remote itself.

What you get:

  • Moulded pocket. The cavity follows the remote's actual lens-shaped cross-section, not a box around it. 0.5mm clearance per side gives a light friction fit — held with barely any wobble, still draws out one-handed. Nothing rattles down a B-road.

  • Open front. Buttons from BACK down stay visible and usable in the holster, with the remote held by side rails and a deep bottom pocket.

  • Recessed tape channel. The flat back pad has a 20mm-wide, 0.6mm-deep channel that locates a strip of 19mm VHB tape and hides its edge. Fits 1mm-thick foam tape — the tape stands proud, the shoulders act as a hard stop when you press it home.

Compatibility: designed around the Cello webOS Smart TV remote (the one with the Freeview Play button). The shell measures 170 × 47 × 22mm — the same as LG's AKB75675304/AKB75675311 family, so it should fit those too. Measure yours before printing; a fraction of a millimetre matters at this clearance.

Tagi