Wirespooler_Wirestorage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
But it also fits approx. 4m of 1mm solder wire very well.
You will just need 3pcs of 3mm woodscrews, with a thread length of up to 8mm, i used screws with 6mm long threads. Countersunk or flat head screws, it depends on your preference (choose the right file).
The files contain three modifiers around the holes to increase the number of perimeters for the hole walls only (i recommend at least 4 perimeters).
To wind the wire in, put the wire end through the hole in the ring and through the hole in the base so it comes out of the center. To hold the wire end in place while winding, just bend it.
For the winding itself. You have to hold the outer ring and turn the inner base. When you get close to the end, be careful not to let the second end of the wire slip inside.
The direction of winding doesn't really matter; it's up to you. The four dots around the ring are for orientation only.
The unwinding process is the easiest part. I hope you enjoy this little tool as much as I do.