Meraki MS120/MS130 switch rackmount ears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rackmount ears for Meraki MS120/MS130 switches
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rackmount ears for
Meraki MS120-8FP, Meraki MS130-8X and Meraki MS130-12X (23cm wide)
Meraki MS120-8, Meraki MS120-8LP, Meraki MS130-8P and Meraki MS130-8P-I (22.2cm wide)
switches. The ears attach to the built-in wallmount ears of the switches with two screws on each side(I used the provided thumb screws that came with the switch).
Two models are provided for each model group fo either M6 machine screws, or imperial UNC 12-24 (5.6mm) screws.
NOTE: The MS120-8, MS120-8LP, MS130-8P and MS130-8P-I are 8mm narrower then the MS120-FP, MS130-8X and MS130-12X. This means that the ears for the wrong switch type may fit your rack, but no guarrantees are given, and depending on your rack using the wrong ears may not fit properly (ask me how I know...).
Made to be printed with cheap PLA and 50% infill and have been load tested for 1 year witout significant sag.