ESP32-S3-DevKitC-1 Rack Tray — 10" Rack, Flat Mount 2U
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10" rack tray holding five ESP32-S3-DevKitC-1 boards flat, side by side.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Rack tray for 5x ESP32-S3-DevKitC-1 boards, organized for ESP32 clustering. Personally used to run AI agents, but also fits nerdminer clusters, experimentation rigs, or general dev board wrangling.
Compartments are designed for easy access — quick to seat a board or pull one for reflashing/swapping.
Hardware required:
6× M3x5x4 heat-set inserts (Voron spec)
6× M3x6 countersunk screws
Printing
Prints without supports. The included profile uses PETG.
Material: PETG or PCTG minimum
The photos show the model printed in PETG.
Fusion archive and step file included.
Support my work
Do you like my work?
A like or a comment means a lot and keeps me making more.
Post your make in the comments section and on other 3D printing social media sites.
Your support helps me keep designing, fund the filament and materials needed for prototyping, and share everything for free.
Consider buying me a coffee.
Check out my other designs too!