Muzzle Brake Key Chain Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is meant to store your muzzle brake while using a suppressor, and make it easier to find later. Made for 30cal
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I found another key chain storage tool for rifle thread protectors on Makerworld and it gave me the idea to make one for muzzle brakes, as I also use a muzzle brake as my thread protector. So here is my design. It is made for a 30cal Muzzle brake but should work fine for a 5.56/.22 muzzle brake if you size the main shaft down to 5.4mm diameter. Size down the nut accordingly as well
This is meant to store your muzzle brake while using a suppressor, and make it easier to find later.
The nut is a printed 6mm nut, the threaded shank is 20mm long.
I set the infill at 100% and did 10 walls for longevity.