Muzzle Brake Key Chain Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is meant to store your muzzle brake while using a suppressor, and make it easier to find later. Made for 30cal
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I found another key chain storage tool for rifle thread protectors on Makerworld and it gave me the idea to make one for muzzle brakes, as I also use a muzzle brake as my thread protector. So here is my design. It is made for a 30cal Muzzle brake but should work fine for a 5.56/.22 muzzle brake if you size the main shaft down to 5.4mm diameter. Size down the nut accordingly as well
This is meant to store your muzzle brake while using a suppressor, and make it easier to find later.
The nut is a printed 6mm nut, the threaded shank is 20mm long.
I set the infill at 100% and did 10 walls for longevity.