Heater Cover for Hobby Caravan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cover for the heater outlet on the Hobby Caravan, similar to the original one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this cover for the heater outlet of the old Hobby Caravan, might work for some other models as well perhaps.
Style will resemble the original.
You will need to print this standing up which is a bit challenging, so do use a lot of supports for keeping it upright and to not warp during print.
The Distance part you should be able to just press in place after the print before screwing it in place.
Use M4 stainless steel screws and nuts to mount on the Caravan.
The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.