1 / 12
The Drinkall Ligation Station - a knot trainer for medical / veterinary students — zdjęcie 1
1 / 12

The Drinkall Ligation Station - a knot trainer for medical / veterinary students

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple print, no supports. Creates a ligation / knot trainer to simulate various scenarios, and levels of challenge.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
638
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Created by Dr. Emma Drinkall, Assistant Professor, University of Nottingham School of Veterinary Medicine and Science - email [email protected]

A simple print, no supports needed. If given the option to make overhangs printable on the pot, select this for a slightly cleaner print.

This kit creates an affordable, reusable ligation / knot trainer to simualte various scenarios, and levels of challenge for students.

Tie quick release knots on the top rings, or around the uprights, or tie surgical knots around the hair tie, to oppose the bands, or deep into the pot to the eye.

Simply lift the pot to cut / untie ligatures from the eye bolt.

You can run a tubing line eg giving set to tube through the top holes of the uprights to create a bleeding line to test ligatures.

Easily fixed to surfaces with suction cups, small F clamps, or bolts. This can move to a range of teaching environments.

Assembly is simple, as shown in the photos.

Released under Creative Commons - attribution, non commercial, shared alike. Attribution details above. 

Additional resources needed:

  • 4x suction cups (mine are xmas light holders, 35mm diameter outer, 12mm diameter stalk, adding a fialment section the gap improves the friction fit to the base but is not needed)

  • 1-2 x split ring

  • 1 x elastic hair tie 

  • 2 x F clamps

  • Paracord, suture material

  • 1 x Needle holders - please make sure to provide left handed kit for class use cases.

  • 1 xEye bolt - M5 / 5mm 

Tagi