1 / 18
Smartphone holder smartphone stand Phone Holder Phone Stand adjustable geared stojan stojanek drzak mobil telefon nastavitelny easy print without support tested
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable phone holder. Easy printable without support. More down.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
Use random seam.
For phones without (E, G) and with (F, H) cover (max. phone depth 10(E, G) and 20(F, H)mm).
Size lenght x width x height 100 x 64 x 85mm.
Wall depth 3mm.
Filament need cca 18m.
For E, F, G, H use brim. For B is better to use more wall loops (3-4).
When going completation hard use water.
Use glue for hard plastic for parts B and D, when you need.
Bolt (D) make for set up backlash between parts A and B.
Tested PLA 0,2mm, 2 (for B 4) wall loops, 15% infill, random seam, brim for E.
Tablet holder: