TEG-S5091 Trendnet Switch 19in server rack mounting brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows a 9-port Trendnet TEG-S5091 switch to fit in a 19in server rack.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Apologies for the absolutely awful photo of the print, the lighting is terrible by the rack.
Allows a 9-port Trendnet TEG-S5091 switch to fit in a 19in server rack. Likely fits other network switches, but beware that some of the Trendnet sizing information listed for this switch is wrong online.
I used the 16mm M3 screws mentioned in the original model's description. I did not print the nuts in place, but was able to force them in with a mallet and a flat-head screw driver. Pretty easy to assemble and was relatively quick to print at a 0.4mm layer height with my 0.6mm nozzle. A bracket and plate pairing can easily fit on a MK3/4 print bed.