TEG-S5091 Trendnet Switch 19in server rack mounting brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows a 9-port Trendnet TEG-S5091 switch to fit in a 19in server rack.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Apologies for the absolutely awful photo of the print, the lighting is terrible by the rack.
Allows a 9-port Trendnet TEG-S5091 switch to fit in a 19in server rack. Likely fits other network switches, but beware that some of the Trendnet sizing information listed for this switch is wrong online.
I used the 16mm M3 screws mentioned in the original model's description. I did not print the nuts in place, but was able to force them in with a mallet and a flat-head screw driver. Pretty easy to assemble and was relatively quick to print at a 0.4mm layer height with my 0.6mm nozzle. A bracket and plate pairing can easily fit on a MK3/4 print bed.