Universal Top Tether Dual Umbrella Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A practical double umbrella holder for your car that easily mounts onto the Top Tether anchor point behind the rear seat
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Key Features
Smart Top Tether Integration: Efficiently utilizes the child seat anchor point, which often goes unused in most cars.
Dual Capacity: Safely holds two standard compact (folding) umbrellas or smaller stick umbrellas.
Clean & Organized Trunk: Keeps your umbrellas off the trunk floor, protecting them from dirt and leaving more room for your groceries or luggage.
Recommended Print Settings
IMPORTANT MATERIAL NOTE: Because car interiors can get extremely hot during the summer (especially near the rear window), do not use standard PLA, as it will warp and melt.
Recommended Materials: PETG, ASA, or ABS (for high temperature and UV resistance).
Layer Height:
0.20 mmor0.24 mm(for a good balance between speed and strength).Infill:
25% - 30%(Gyroid or Grid pattern for maximum structural strength).Perimeters (Wall Loops):
3 to 4(Crucial for making the clip mechanism sturdy enough to handle vibrations).Supports: (Add a note here whether your model needs supports or prints fine without them based on its orientation).