Universal Top Tether Dual Umbrella Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A practical double umbrella holder for your car that easily mounts onto the Top Tether anchor point behind the rear seat
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Key Features
Smart Top Tether Integration: Efficiently utilizes the child seat anchor point, which often goes unused in most cars.
Dual Capacity: Safely holds two standard compact (folding) umbrellas or smaller stick umbrellas.
Clean & Organized Trunk: Keeps your umbrellas off the trunk floor, protecting them from dirt and leaving more room for your groceries or luggage.
Recommended Print Settings
IMPORTANT MATERIAL NOTE: Because car interiors can get extremely hot during the summer (especially near the rear window), do not use standard PLA, as it will warp and melt.
Recommended Materials: PETG, ASA, or ABS (for high temperature and UV resistance).
Layer Height:
0.20 mmor0.24 mm(for a good balance between speed and strength).Infill:
25% - 30%(Gyroid or Grid pattern for maximum structural strength).Perimeters (Wall Loops):
3 to 4(Crucial for making the clip mechanism sturdy enough to handle vibrations).Supports: (Add a note here whether your model needs supports or prints fine without them based on its orientation).