630 models
This is my own printed version of the open origami umbrella. It can also be a fidget toy to play on your desk and a perfect test for a great first layer of your printer!!! Print instructions and Settings I include .stl , .3mf and .gcode…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
I saw a youtube video from Rick Mayotte ( https://www.youtube.com/watch?v=GuEb3Y1t-BQ ) where he builds an old-fashioned Whirligig out of wood. I have been designing a variety of 3D printed Wind Spinners. I adapted his design and printed…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
I designed this Drill Tip to substitute the simpler older one left “don't know where”. I printed it in PLA with 4 perimeters and 40% of cubic infill to give it more strength. it eventually can be treated with a coat of epoxy resin. ps.…
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
I simply took the original design, scaled it down, and added a chain attachment piece that you can drill to the desired size, so not much credit there. Thanks to the original modeler Synth3D. Print the triangles in the desired colors and…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
You can also use it for scarves, handbags, coats, towels etc. Use screws 3.5 to 5 mm in diameter to attach the hanger to the wall (holes are 5mm in diameter). Print lying on the side (see 3mf file). Also check out:…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
I needed a speedlight & umbrella mount, and the other two that was available to print had the limitation of being set in a horizontal position that would not work for the photoshoot that I needed to do. So I redesigned using other…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
This is my first design. Should be used on multimaterial, where transparent red one is designed for tritium rods or can be printed with glowing filament. Also possible to print separately and glue parts together. Now it is designed that…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
My daughter ordered this nice Luggage Tag with the umbrella corp. from resident evil. I used PETG. Update: Added two new Versions: Japanese Umbrella Corp. : アンブレラ社 Original motion picture movie like logo: UMBRELLA CORPORATION You still…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Story: I accidentally broke the lamp shade of my gfs lamp. Immediately I told her that I will print a new one for her. She asked for a lamp shade in the shape of an umbrella. After doing some research I could not find a suitable model and…
Print approx. €15.04–€18.38 excl. taxPreliminary estimate for PETGSource material: PET
Makes an umbrella shaped cookie
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
A multi-color 45 RPM record adapter. Print Settings 0.1 mm Layer change at: Layer 20 - 2.10 mm Layer 24 - 2.50 mm 0.15 mm Layer change at: Layer 14 - 2.15 mm Layer 17 - 2.60 mm 0.2 mm Layer change at: Layer 11 - 2.20 mm Layer 13 - 2.60 mm
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
print in with TPU with given orientation
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Do you have an outdoor table with a hole in the middle for an umbrella… but don't use that kind of umbrella? Do you enjoy sitting outside on a nice day… maybe at that table, and would like to plug something in, like your laptop or charge…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Someone mentioned that large umbrellas are hard to carry, so I made a holder. It have a Picatinny Rail (20mm rail) and a Modular Lock (M-LOK), but it is not particularly meaningful. It might be somewhat useful to add a light or a hanging…
Print approx. €6.37–€7.78 excl. taxPreliminary estimate for PETGSource material: PET
EN: A device with hooks and a tray where objects can be placed, that is easy to attach to mounted parasols with a stand up to 39 mm, using a snap-on mechanism. Can be easily fixed in the desired position with 2 screws and, thanks to the…
Print approx. €7.57–€9.26 excl. taxPreliminary estimate for one variant
LCD Cover for the Original Prusa Mini.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Piece inserted in base of umbrella to keep it in center. With the OpenSCAD file, costumize the piece to fit on your umbrella base. Parameters of file : UmbrellaPoleDiameter: diameter of pole of your umbrella BaseHoleDiameter: diameter of…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
This is a small but very useful printout for resetting a small opening button that is missing on an umbrella. I just glued it to the metal part of the mechanism.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Change the parameters in the enclosed .f3d to match our table/umbrella. Wood PLA Filament was expending on the XY plane, made the ring smaller/thinner. Since it is not structural, outdoor exposure is not a concern. Beside it is a…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
I wanted to add an umbrella to my IKEA Nämmäro outdoor table which isn't something the table is designed for. To avoid having to put two perfectly lined up, perfectly straight holes in it I designed this adapter which fits over the foot…
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for one variant
Umbrella suspended in a rain shower artwork. It prints without supports and I used a brim to keep everything secure as I was printing fast. Be gentle when removing from the buildplate Print at 0.3mm layer height and if using Bambu Studio…
I have designed an umbrella holder for the trunk. Two hooks are needed that hook into the Isofix holder in the trunk. I have printed them in TPU but it should work in any other material. I think it should work for any car with Isofix…
I designed this hanger as a solution to the main problem with the beach umbrella. Thanks to the piece inside, you can use it on umbrellas of many sizes. You can change the size of the model for more different sizes. Print Settings…
I have also made a version for two umbrellas on request. I printed it out of PETG but other materials will also work.
Print on side. Will need small support for hook. Recommended to be printed in ASA or equivalent material. -Enjoy-
Description FORD FOCUS ST UMBRELLA HANGER I took inspiration from the model and modified the model allowing for a more secure fit and adding the ST logo for Fords! It all looks very nice and makes everything more racing! Print it and…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Surely you noticed the hole in the center of the round garden table ? It's there for a reason! Meet two additions that will expand the capabilities of the table! Protect a covered table from rain or sun? Easy as pie! With an amazing…
Little table with adapter 32mm other acessories soon….stay tuned Print Instruction, very easy: print it with PLA filament and without support print base and glasses together To assembly: Put the glasses into the base in the right way. I…
I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.
NEW VERSION HERE: Umbrella Corporation Tool Box Multicolor and Multipart with Flipped Logo (Recommended) Umbrella Corporation is a fictional pharmaceutical company that secretly created bioweapons and zombies. The Umbrella logo is…
Umbrellas are the best way to stay dry on a rainy day, and their main downside is that one has to hold it. This model solves this by making your backpack hold your umbrella for you ! Also works with sticks or other long and thin objects…
Wile E Coyote holding an umbrella Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Dimensions: 35x35x3 mm Print time is more or less around 24m at 0.16 layer heigh (0.4 mm nozzle). Print time is more or less around 32m at 0.12 layer heigh (0.4 mm nozzle). Print parameters: Layer height - 0.16 mm or 0.12 mm Perimeters -…
Umbrella Corporation Tool Box Multicolor and Multipart with Flipped Logo is a 3D printable model that lets you create your own tool box inspired by the Resident Evil franchise. It is a remix of the Tool box parametric model by Yanev ,…
Beach umbrella sand anchor Needed a sand anchor for my beach umbrella. Picture from the hot sand on a beach in Spain. Fits umbrella poles up to about 24mm (the hole is 25mm but I would expect some expansion in the printing process). How…
Update: Second, smaller version uploaded! Both versions of the holder are printed in one piece each. The first version is 10 cm high on the print bed and has an inner diameter of at least 8 cm. When unfolded, the holder consisting of four…
Keep your beach essentials organized with our beach umbrella hanging hook. Perfect for towels, bags, and hats, this durable and portable hook attaches easily to any beach umbrella or tent pole. Enjoy a sand-free and clutter-free beach…
If everything goes according to plan, this is the first of several Umbrella Gland Plant models. New models will be uploaded separately. However, I'll also add them here. This is a younger one. A few weeks later it will grow higher and…
Umbrella Corporation - Security Division, Raccoon City, License Plate Frame, Resident Evil Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
I have a thing for the Umbrella logo so I decided to make one for myself. It's quite chunky so it can stand on its own but you could always trim off a bit in the slicer and just lean it against something to cut down on the print time.…
I created a holder for an umbrella and retriever that fits the Zuca Backpack LG or Zuca Trekker LG disc golf carts. It attaches with zip ties. I haven't tested it on other models. No supports needed. I printed with PETG and with 40 %…
Umbrella holder for the trunk. Two hooks are needed that hook into the top tether mounting points. I think it should be printed with PETG, ABS or other heat resistant material, because the trunk can get hot in the summer.
ISOFIX Umbrella hook to fit Hyundai Tucson and Kia Sportage. Simple double umbrella hook that I made to fit Hyundai and Kia car models as all the ones I downloaded didnt fit. Hopefully this helps someone else. Just push down and it should…
This design can be used to make a pin or a coin of the Umbrella Corp. Logo. Original measurements are are 6 cm diameter and 5 mm high. For the print i'd suggest using at least 0.2 mm layer height with a standard 0.4 mm nozzle.
Mods for this awesome model, a single print parasol, and a layered body so you can layer change to get colours. Not exactly plug and play, you will need some pieces from the origin models or make your own and you will need to modify the…
A Resident Evil inspired lighter case specifically made to fit your typical Bic brand lighters.
Printing a few of these for table decor/party favors. Running each color on a separate machine so I don't have to do filament swaps.
Keep your stick umbrella within easy reach and your luggage compartment neatly organised. Designed for the back of the rear seat, this 3D-printable umbrella holder makes practical use of the available space. It keeps your umbrella…
This is a replacement for old beach umbrella tips for easily insert into the sand or beachstone. Thia model of beach umbrella screw tip is for pipe with 31.5mm internal diameter. Snap-in mounting, optionally if you have a loose fitting…
Need an Umbrella mount for your Disc Golf cart? Here you go! Print Settings Printer Brand: Prusa Printer: i3 MK4 **Rafts:** No Supports: Yes **Resolution:** .2 Filament: Hatchbox PETG Black Notes: I've printed as low as 10% infill. Still…
Mount for umbrella on trunk of Bmw F31
This is a remix of the Umbrella Corporation Tool Box by Frikarte3D which is a remix of the parametric model by Yanev. I've combined all the items for the lid so that it can be easily printed in one go with the BambuLab AMS. I also added a…
Bring the beach to your dollhouse! This model set is designed to be a stylish and functional accessory for Barbie-sized dolls. The star of the show is the deck chair , which features a realistic folding mechanism just like the real thing.…
My Free Bust of a Umbrella Corps Member which is a part of my newly created Custom Bust Series. Check out all my paid busts and get access to monthly STL's on my Patreon Patreon: https://www.patreon.com/Bayfaire/ Patron's also receive PNG…
My design for a wall mounted stand to store 3 umbrellas. I have included 2 alternatives for the bottom bracket, one to allow drainage to the floor and the other with a sealed bottom to store the drips . The mesh pattern on the front face…
This model is compatible with the lego system.
Holder for up to 1.5" umbrella handles and retrievers such as the Quick Stik XL/DD/Remix ect for Zuca discgolf carts. 4 x 3M bolts to screw both halves together. Screws should self-tap 0.25mm layer height 3 perimeters PETG is preferred,…
size: 73,75 x 83 x 16 mm
This world needs more "Resident Evil" stuff. So I created an extruder visualizer for my MK3s. Designed for a 3mm magnet. This is designed for MMU/Palette or other multi-color printers. Print instructions Category: 3D Printer Accessories…
Here's a link to the CAD if you'd like to remix
Wall sign from Umbrella Corp for quarantine. I accomplished the three colors on my Ender 3 by doing two filament changes. First was at layer 11 to go from black to white, then at layer 16 from white to red. The last two layers are the red…
I think you will need supports to print this
Resident evil umbrella logo for resident evil enthusiast
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
🇬🇧 English version Sand Screw – Beach Umbrella Anchor This Sand Screw is designed to securely hold a beach umbrella pole in the sand. The spiral shape allows the anchor to be screwed deep into the sand, providing better stability than…
The opening in this version is 40mm diameter which I found was a good size for a 38mm umbrella, not a tight fit that would strain the material but enough to hold the umbrella straight. I printed in white PETG as this is being used outdoors.
Replaces the pylon cover behind the seat, needs some work. I have also shared the f3d file to edit, feel free to optimize and tag me.
AquaStar - Pool Umbrella Stabilizer Sleeve Reducer Adapter Basketball The standard AquaStar 5" SMUSxxx umbrella stand sleeve fits a pole diameter of 1.675”. I made an adapter reducing the hole size to 1.5”, plus a little 1.0mm wiggle…
Durable umbrella handle. Print without supports. STL file has a 10.5mm hole suitable for an umbrella with a 10mm shaft. 3MF file has a negative space cylinder for adjustable shaft diameter.
https://www.hi3d.ai/share/e1d0492f986f4a02b30fb98b2ad72ce0?inviteCode=Y8Axoeva9P&shareType=history_model
In love with the Capcom video game saga, I couldn't help but create the right cover for this new competition. I included all the classic references to the resident evil umbrella corporation logo
Das Logo habe ich selbst entworfen um es mit einem Drucker ohne AMS zu drucken. Dazu muss man für die unterschiedlichen Schichten eine Pause einplanen vor dem Druck um das Filament zu wechseln.
This adapter allows to clip the Bugaboo umbrella onto a Babyzen YOYO2. It requires a M3x16 screw and hex nut to clamp onto the side rod. Ideally, print a second mirrored version to be able to swap the umbrella between both sides. The…
Color change on Lettering, and inserts just pop in to the base, 4 red, 4 white
10 mm diameter umbrella holder for your backpack. Use strap to mount it to your backpack. Print two for better stability.
Capture the essence of elegance in motion with this stunning 3D printable figurine that brings artistic sophistication to any space. This graceful female figure showcases a woman in flowing dress carrying an umbrella, perfect as desk…
Umbrella Corkscrew mount for the sand 250mm in length, 40mm x 30mm insert shaft for the pole with x2 bolt holes. I printed mine in PTEG Pro with a .04mm nozzle, it has worked very well for me so far.
☂ Designed to eliminate swaying on windy days, The Umbrella Pole Wedge is a flexible, durable TPU wedge plug that locks your 1.5" umbrella pole firmly in place. Say goodbye to shakes & wobbles, and hello to peace of mind during your next…
This is an umbrella holder with a removable tube for when not in use. This is for a 9 degree back. Base is 80mm wide and 140mm tall. Base .3mf has a small base layer added to ensure bed adhesion. Printed with six perimeters on the base…
Paraguas hecho como accesorio para el mini-helpi de Ayudame3d. Requiere borde. Con cariño.
I was unhappy with the position of the original or printed cup holders (the one I use: https://www.printables.com/model/322659-bugaboo-coffee-cup-holder from @spalex) so designed this adapter. The BugagooFox5 seems to have 2 points for…
Remixed "Umbrella Hanger for Ford Focus/Puma/Fiesta - ST Logo" to fit an Mk7 Fiesta ST
This is a remix from TheMakersWorkBench in which I only combined the 2 pieces into a single one, so there's no need to use glue. I printed it with PETG with 15% infill Category: Camera
This simple two-piece mount holds a Thermacell E55 Mosquito Repeller (links below) without blocking chimney for functional airflow. May also work on other Thermacell E Series Repellers but I don't have any to test (if it does, let me know…
Stops your umbrella from falling side-to-side on windy days
A simle holder / stand for 3 umbrellas. Print two holders and mount them on top of each other. I printed them with rPETG, 0.25 Layerhight, 4 Perimeters (= 100% Infill). I used a Brim against warping.
Set of 3 cookie cutters - Umbrella, Drop and Cloud Dimensions are next: 110х100х10mm - umbrella 40x50x10mm - drop 96x62x10mm - cloud PLA with cooling, thin walls - On, layer 0.16-0.24mm.
Simple merge of two useful things into one USEFULER thing! Printed in PETG, but PLA is ok too I suppose, standard print option seems ok, it's not rocket science. Original model was scaled to Suzuki Swift isofix, they are pretty standard,…
Umbrella Corporation badge
The umbrella holder for my pool has a 1.75" diameter, but all the pool umbrellas I could find have a pole with a 1.5" diameter. This means the umbrella moves around a bunch, especially if it's windy. There are adapters online, but the…
SUPPORTO PER L'INSTALLAZIONE DI UNA VENTOLA DA 120MM CON MOD DEDICATA A RESIDENT EVIL UMBRELLA CORP CON APERTURA MANUALE A FORBICE SUPPORT FOR THE INSTALLATION OF A 120MM FAN WITH MOD DEDICATED TO RESIDENT EVIL UMBRELLA CORP WITH MANUAL…
This is an improved version of my earlier design - https://www.printables.com/model/1266743-outdoor-table-umbrella-bush-assembly The earlier design has a parallel bore which is fine if that's what you want, however my wife found it…
Umbrella Rib carrier for 6 ribs 38mm beach umbrella ( repair old broken umbrella ) print for top or bottom with strings risers for both sides 24x 30mm m3 hex screws each is 12 ( 6 for the rib carrier and 6 to bolt down everything I used…
I've seen numerous designs for regular beach umbrellas, but none for the Cool Cabana. I printed the main piece with supports and the screw with a brim. The shim is optional, but will fit snuggly on the main pole to help keep things tight,…
My umbrella top broke and decided that I should make a new one. I just thought that I should up the game a little.
sun shade / umbrella holder, 25mm Holder, 19mm Holder and 25mm to clamp. to screw and to clamp. Print in Pla+, ASA or what you want. 0.2 Layer height, 5/5 Layer, 4 walls, 40 % Infill, no support needed.
