Origami Umbrella
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.19 net (excluding VAT)
For file: SHAFT AND END TOP.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 13.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is my own printed version of the open Origami Umbrella.
- Rating
- 4.857 / 5
- Likes
- 133
- Downloads
- 735
- Makes
- 8
- Views
- 3,310
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- GNU General Public License v3.0
This is my own printed version of the open origami umbrella. It can also be a fidget toy to play on your desk and a perfect test for a great first layer of your printer!!!
Print instructions and Settings
I include .stl , .3mf and .gcode files for all parts. All printed fine in PLA.
If you use attached *.3mf files you will find the following settings for printing:
Umbrella Panel
Designed to be printed at 0.2 mm layer.
Important!! You must use “Octagram Spiral” pattern for bottom fill so that panel is not broken when folded. I also used “Aligned Rectiliniar” patter for top fill.
Handle
Printed at 0.15 mm layer with supports.
End Top and Shaft
Printed at 0.15 mm layer and 3 mm brim
Filament:
Smarfil Black, Red and Brown
Assembly Instructions
Once printed remove all brims with a cutter.
Parts only need to be press fitted (In case any part is loose you can use a small drop of glue)
Follow the next instructions (see photos)
1.- Press fit Handle and Shaft
2.- Fit through Umbrella Panel and press fit End Top
3.- Carefully start bending the panel by the marks. I do reccomend to start by the exterior and do not completely fold each mark in one step. If you make several iterations the result will be perfect as shown in the photos.
4.- Any comment, question or doubt please ask!
5.- Please share your make!