1 / 4
Longer-Arm Canopy for BetaFPV Air75/Air65 Custom Frame M2 Holes — zdjęcie 1
1 / 4

Longer-Arm Canopy for BetaFPV Air75/Air65 Custom Frame M2 Holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The standard Canopy for BetaFPV Air65 and Air75 with extended arms so as to fit @Pavel_74949's Tinywhoop frame.

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Air75/Air65 Canopy with extended lower arms designed to protect the camera more than the standard mount does. Frame it is designed for: https://www.printables.com/model/217934-tiny-whoop-frame-1s-31g-auw

In my build, I use M2x20mm screws to connect the frame's base and prop-guard components, leaving the spacers out. The canopy itself should slide onto the screws sticking out at the top and should be fixed by M2 nuts.

If you are converting from the standard recommended configuration of the frame to this canopy, this is what you need

  • 4x 20mm long M2 screws

  • 4x M2 nuts

Tagi