Longer-Arm Canopy for BetaFPV Air75/Air65 Custom Frame M2 Holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The standard Canopy for BetaFPV Air65 and Air75 with extended arms so as to fit @Pavel_74949's Tinywhoop frame.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Air75/Air65 Canopy with extended lower arms designed to protect the camera more than the standard mount does. Frame it is designed for: https://www.printables.com/model/217934-tiny-whoop-frame-1s-31g-auw
In my build, I use M2x20mm screws to connect the frame's base and prop-guard components, leaving the spacers out. The canopy itself should slide onto the screws sticking out at the top and should be fixed by M2 nuts.
If you are converting from the standard recommended configuration of the frame to this canopy, this is what you need
4x 20mm long M2 screws
4x M2 nuts