Counting matching models…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
Case for the BetaFPV Air65 TinyWhoop
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
A simple, small box for storing and safely transporting the Air65 drone and 10pcs LAVA 1S 300mah (260mah) batteries
A pluggable battery holder that allows you to fly your BetaFPV Air 65 with bigger battery packs like 450mah / 550mah or any battery pack of 17mm of width. Optionally use a M2 screw to secure it to the frame. Sources available!
Air65 canopy ultra light.
This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions…
This is a canopy for the BetaFPV Air65 (C03 camera) tiny whoop FPV drone with a camera angle of just 15 degrees, perfect for indoor flight. It allows slower and more controlled flight. The canopy is also reasonably light weight and…
I have adapted the case from user Hero. once. Now it fits eight 300mAh Lava batteries and on the lid you can find the outline of Sailor Moon ( the case is for my girlfriend ) - of course only the bottom part can be charged, as it is…
This is a 1s Lipo cage and adapter for tiny whoops, its meant to be inserted in the 11mm battery holder to use bigger 550mah lava batteries, it also protects the batteries from being smashed if you crash. it weights roughly 3.4g. Print…
Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment. This design allows you to upgrade to a more…
Fits an Air65 whoop with canopy at any angle plus 10 batteries. Batteries will fit in either direction to indicate charged and discharged packs.
This is a remix from 2 different projects on here, but i made it with the intention of using the best from both worlds, its a air 65 or alike tiny whoop case.…
A simple cooler for a 65 mm tiny whoop. I needed to adjust a few functions, but specifically with the Air65 the temperatures reach more than 70°C after a few seconds. Especially when you set the power to 100 mW or more xD That's why I…
Overview The Supa-Toothpick is a community-refined, high-performance micro frame designed for pilots who want maximum speed on a "brokey" budget. By harvesting the electronics from a BetaFPV Air65, you can move into this frame to gain…
This is a frame replacement for the BetaFPV Air65, which is smaller and has NO propguards. NEEDS longer 1.5mm screws to hold the AIO in place, old motorscrews can be reused. Used a BeQuiet Cable Strap from a PSU, which has the width of…
I couldn't find a case to fit my Air75 and a v whoopster together. You can also add batteries in rest of the compartment Print suggestions: 15-20% infill Print with flat size at bottom Features: Requires no support. Snap-on fit
A rugged box for betafpv air65. Main box fits: drone spare frame 17 batteries original charger usb cable for the charger usb data cable (in a small compartment) bottom lid fits: props screwdriver spare canopy whatever you can fit inside…
Updated Air65 case, uses an M6x45mm screw. Holds 20x Lava I 300mah or Lava II 320mah cells. Case includes a tongue to lock the whoop in place using the battery holster. Category: R/C Vehicles
simple extension fo change camera angle
Pojemnik na BetaFPV Air65 większy niż w innych projektach, mieści się dron z podniesioną anteną (pojemnik jest większy o 5mm od innych), mijsce na drona większe o 1mm.Pojemnik na BetaFPV Air65 większy niż w innych projektach, mieści się…
Use TPU, supports and about 10-15% infill
A remix of fuspy's remix of gsatelite battery holder. This one now fits BetaFPV 450mAh 1S LiPos. (and anything else you manage to force into. * cough * GNB 380mAh 🙈) Recommend printing in TPU or something similar. If you've come this far…
BetaFPV Air65 Tinywhoop LED bar Upgrade for BetaFPV Air racing whoop for 3 WS2811 LED strip compatible with original BetaFPV canopy. VTX antenna mount no glue hole for wiring fast repair and replacement Use BFlex or TPU filament. 2…
Screws: 2x M2x10 or filament piece (not tested, may need some glue) This portable battery box features a small, pocket-sized design, a sturdy hinge, and an opening lid. I won't deny that I was heavily inspired by this model (…
Inspired by: https://makerworld.com/en/models/243779-skadis-betafpv-meteor65-meteor65-pro-air65#profileId-260234
This is a small tiny whoop case for an air65! It holds 10 batteries (5 on each side) and can fit up to 4 in the drone housing with the drone. TPU cover that fits securely and adds a nice feel to the case. May add bumpers for the bottom…
Overview The Supa-Whoop V24 is a high-performance 75mm brushless frame designed from the ground up for racing and aggressive freestyle. This design specifically addresses the mounting "clashes" found in many universal frames when trying…
This is just the Battery insert for the BetaFPV Air65 Tinywhoop Case made by melnikod !!! I shrinked just the general size (red markings) by 0.2mm, because it would not fit. The Battery recesses are now a little wider by 0.2mm (red…
super light stand designed for the betafpv air65 but may work with other tiny whoops. can be a be a bit tricky to set up as you will have to put the stand into the battery slot on the drone before setting it down. Print sideways with no…
A stand for the BetaFPV Air65 II (might also work with Air75 II, Air65 and Air75).
I had to edit the screw mounts for better grip to the Flight Controller and the Body and also make the camera scew thicker because there was not enough grip and my camera was rotating when printed out of TPU. - Screw holes have a thinner…
areo-75 is a 3D-printable frame designed for pilots who want the durability of a "Whoop" but the raw performance of a skeletal toothpick. It eliminates gyro noise and provides a rock-solid flight feel. Key Features: Canopy-Ready: Square…
stand for betafpv air65. could fit other tinywhoops. dock size is 10mm x 6mm x 64mm
A case for your BetaFPV Air 65 II tiny whoop. Pretty much the same design as several others, but with a magnetic lid. Takes 8 magnets (6mm dia. x 2mm h.)
Nothing new or fancy, just another adapter/battery holder to attach GNB 380 mAh Lipos to a BetaFPV Air65 II. Print in TPU, fumble it through the frame and slide in lipo, then go fly... Printed some spares as I will definitely lose some.…
- A simple stand for the BetaFPV Air 65 drone. - Just print these two parts and use a regular 2.5mm wire (CYKY) as a leg. You can set your own height and shape of the stand. - I recommend changing the filament in the text height layer :)…
Air75/Air65 Canopy with extended lower arms designed to protect the camera more than the standard mount does. Frame it is designed for: https://www.printables.com/model/217934-tiny-whoop-frame-1s-31g-auw In my build, I use M2x20mm screws…
This simple model of holder are use on Tattu 450mah (Dimension : 63*17,5*7,1 mm) who give and additionnal minute to fly compare to lavaII 320mah (AIR65 CHAMP). Printed with tpu and less than a gram (.39g)
Vous aimez le FPV et le système HSW ? Ce support est fait pour vous ! Cette version a été spécialement adaptée pour le BetaFPV Air65 , afin de pouvoir ranger facilement votre micro-drone directement sur un Honeycomb Storage Wall (HSW) .…
A 3x3x8 Gridfinity stackable box for BetaFPV's Air65 plus its USB-C adapter, using the original foam packaging .
Air65 Wall Mount for IKEA Skådis A clean, single-piece wall mount for the BetaFPV Air65 1S Tiny Whoop. No more drones rotting in a drawer between cables and accessories — just snap the holder onto your IKEA Skådis pegboard and your whoops…
This is just the Battery insert for the BetaFPV Air65 Tinywhoop Case made by melnikod !!! I shrinked just the general size (red markings) by 0.2mm, because it would not fit. The Battery recesses are now a little wider by 0.2mm (red…
stand for betafpv air65. could fit other tinywhoops. dock size is 10mm x 6mm x 64mm
This simple model of holder are use on Tattu 450mah (Dimension : 63*17,5*7,1 mm) who give and additionnal minute to fly compare to lavaII 320mah (AIR65 CHAMP). Printed with tpu and less than a gram (.39g)
![[Better screw-holes] BetaFPV Air Canopy - For Air65 and Air75 Tinywhoops](https://media.printables.com/media/prints/f5502fc3-d1a1-4daf-b969-8298113e9d2e/images/13729488_bdb2cf81-db19-4906-947d-9d2cbb7b5656_d3d0f7c8-a33b-44b5-9990-82c4666a81f4/20260903_181357.jpg)
