1 / 3
DeskPad 300x700 Holder, Storage tube — zdjęcie 1
1 / 3

DeskPad 300x700 Holder, Storage tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A storage for a desk pad with height of 300mm

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This project is a storage tube for deskpads with maximum height of 300mm. I tested it with a deskpad size 300x700x2 and it had room to spare so I assume that 300x800x2 would also fit. 

Files

There are four files, three stl files and one .step file:

  • You can either choose to print both parts at one with the BothParts-v1.stl or print one at a time with TopPart-v1.stl and BottomPart-v1.stl

  • If you want to edit this project, I have also included .step file

Settings

I used fuzzy skin to add a pattern and make it less boring, but it added 3h to the print job

Printing using fuzzy skin took 6h on my Creality K2, without it it would have taken around 3h.

Should print great on default settings (0.2mm layer height, 0.4mm nozzle, etc.) and 5mm wide brim enabled. 

My version printed using PET-G