1 / 3
DeskPad 300x700 Holder, Storage tube — image 1
1 / 3

DeskPad 300x700 Holder, Storage tube

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A storage for a desk pad with height of 300mm

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

This project is a storage tube for deskpads with maximum height of 300mm. I tested it with a deskpad size 300x700x2 and it had room to spare so I assume that 300x800x2 would also fit. 

Files

There are four files, three stl files and one .step file:

  • You can either choose to print both parts at one with the BothParts-v1.stl or print one at a time with TopPart-v1.stl and BottomPart-v1.stl

  • If you want to edit this project, I have also included .step file

Settings

I used fuzzy skin to add a pattern and make it less boring, but it added 3h to the print job

Printing using fuzzy skin took 6h on my Creality K2, without it it would have taken around 3h.

Should print great on default settings (0.2mm layer height, 0.4mm nozzle, etc.) and 5mm wide brim enabled. 

My version printed using PET-G