1 / 2
Build Tray Remix — Larger Organizer Base with TPU or Felt Feet — zdjęcie 1
1 / 2

Build Tray Remix — Larger Organizer Base with TPU or Felt Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix to add feet to the tray base

Ocena
0 / 5
Polubienia
3
Pobrania
37
Wydruki
0
Wyświetlenia
345
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Very happy with @polymorphic's build tray but didn't like how it was sliding around on my desk, so here's a quick and easy remix.

I've added four cutouts to hold TPU feet (included) or round felt feet up to 20mm (3/4 inch) diameter. The feet are positioned so they don't interfere with the inserts for stacking.

While I was at it, I also added 2 mm in dimension as I found it difficult to squeeze the inserts into the original base. As a result, the base is not compatible anymore with the original base but all the inserts from the original design fit nicely. 

I printed the base with PLA, 0.3 mm layer height, 15% adaptive cubic infill, no supports. For the feet I used TPU95A, 0.2mm layer height, 15% adaptive cubic infill, no supports.