Build Tray Remix — Larger Organizer Base with TPU or Felt Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix to add feet to the tray base
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Very happy with @polymorphic's build tray but didn't like how it was sliding around on my desk, so here's a quick and easy remix.
I've added four cutouts to hold TPU feet (included) or round felt feet up to 20mm (3/4 inch) diameter. The feet are positioned so they don't interfere with the inserts for stacking.
While I was at it, I also added 2 mm in dimension as I found it difficult to squeeze the inserts into the original base. As a result, the base is not compatible anymore with the original base but all the inserts from the original design fit nicely.
I printed the base with PLA, 0.3 mm layer height, 15% adaptive cubic infill, no supports. For the feet I used TPU95A, 0.2mm layer height, 15% adaptive cubic infill, no supports.