Waveshare DS5 Dongle - USB-A Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of my other model for the DS5 Dongle, this time transforming the dongle into a USB-A version.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modification to my other model. The dongle's length is slightly longer to accommodate a cheap male USB-C to male USB-A adapter, allowing the dongle to be plugged directly into a USB port without needing a cable.
Buy the USB-A adapter here: https://www.amazon.com/dp/B08P57T56M
--------------------------------------
Both BOOT and RESET buttons are available to press, with the BOOT button marked differently by a small indent.
This is meant for the Waveshare RP2350B-Plus-W board, not the standard Raspberry Pi Pico 2/2W.
There are two versions of the top case, the logo's orientation is up to your preference.
No supports are needed when printing. Use a 0.4mm nozzle, and any layer height is probably fine. No glue or hardware is needed to assemble, it is snap-fit!
The LED light bleed can be mitigated from propagating throughout the case by painting the inside of the case with any kind of opaque paint. I used a black Sharpie paint marker and it works great.
If you have any concerns, comments, or questions, please let me know.
Make a DualSense DS5 Dongle here: https://github.com/awalol/DS5Dongle
Thanks to these other models for inspiration. Download or print them too!