1 / 1
Jugs Sports Small-Ball Pitching Machine Feed Chute — zdjęcie 1

Jugs Sports Small-Ball Pitching Machine Feed Chute

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement feed chute for the Jugs Sports Small-Ball Pitching Machine

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A replacement feed chute for the Jugs Sports Small-Ball Pitching Machine

You can print in two pieces to fit within build volume (part is 290mm high).  Supports needed for the top part.  Print as vertical tube(s) at 0.2 layer height in PETG

A friend needed this replacement part, so I walked claude-code through constructing it with some measured dimensions (parameterized in scad).  After editing parameters you can regenerate the STLs using openscad:

openscad -o pitching_chute_lower.stl -D 'part="lower"' pitching_chute.scad
openscad -o pitching_chute_upper.stl -D 'part="upper"' pitching_chute.scad
openscad -o pitching_chute.stl       -D 'part="all"'   pitching_chute.scad