1 / 1
Jugs Sports Small-Ball Pitching Machine Feed Chute
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement feed chute for the Jugs Sports Small-Ball Pitching Machine
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
A replacement feed chute for the Jugs Sports Small-Ball Pitching Machine
You can print in two pieces to fit within build volume (part is 290mm high). Supports needed for the top part. Print as vertical tube(s) at 0.2 layer height in PETG
A friend needed this replacement part, so I walked claude-code through constructing it with some measured dimensions (parameterized in scad). After editing parameters you can regenerate the STLs using openscad:
openscad -o pitching_chute_lower.stl -D 'part="lower"' pitching_chute.scad
openscad -o pitching_chute_upper.stl -D 'part="upper"' pitching_chute.scad
openscad -o pitching_chute.stl -D 'part="all"' pitching_chute.scad