Buildplate Stop for Voron Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buildplate stop for the Voron Trident. Built-in cable channel.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The Voron's Z endstop doubles as a great build plate stop. So why not have two?
Hardware:
M3x16 SHCS (2 qty)
M3 roll in t-nuts (2 qty)
GT2 20T Timing Belt Pulley (5mm ID 6mm W) (Same part as from Z endstop)
5x30mm Shaft (Same part as from Z endstop)
Printed without supports. Same print settings and material as other Voron printer parts.
I included a STEP file to modify / remix.
Notes:
Remove the zip ties from the Z Bed Rear part. This plate stop includes a channel to fit the cables in its place. Be careful not to pinch any wires when installing.
I included a picture of how I installed the spacing for the M3 roll in t-nuts.
Tighten pulley set screws to lock the shaft to your preferred height.