NinoTNC BLE board 1u Rack Mount for Microlab mini modular home server
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1u Rack for mounting a NinoTNC coupled with a BLE adapter board. Mounts into a Microlab Mini Modular home server rack.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Introducing the 1u Rack for mounting the BLE adapter board and NinoTNC.
1u Rack tray is designed to fit the Microlab Mini Modular Home Server Rack.
Has holes on the base to accept threaded inserts and holes behind the front bezel to accept self tapping screws to hold to OLED screen - be careful not to overtighten these otherwise the screen can fracture.
Additional Hardware needed:-
0.91 inch OLED screeen
4 x M3 x 12 screws
2 x M3 self tapping screws
4 x M3 x 4 x 4.6 Threaded inserts
4 x 6mm Standoffs - STL included
Models created in FreeCAD, annotated in Blender. Test printed using Centuri Carbon, 0.4mm Nozzle, 0.2mm layer height, 15% infil, Organic supports.
NB: Using one type of slicer, produced a warning that the model was not manifold, but slices and prints ok.