1 / 4
IWB Magazine Carrier for the Smith and Wesson Bodyguard 2.0 — zdjęcie 1
1 / 4

IWB Magazine Carrier for the Smith and Wesson Bodyguard 2.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An Inside the waistband magazine pouch designed around the S&W Bodyguard 2.0 magazine. Designed for concealed carry.

Ocena
5 / 5
Polubienia
13
Pobrania
51
Wydruki
1
Wyświetlenia
403
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Public Domain

Magazine Carrier Overview

This design allows concealed carriers to comfortably carry a spare magazine in a consistent, reliable position without sacrificing valuable pocket space.

Hardware Required

  • 6 Holster screws

  • 6 Holster nuts (low-profile recommended)

  • 6 Holster rubber spacers

  • 1 "M-block" or similar style holster clip

Assembly & Retention Tuning

You can easily fine-tune the magazine retention by adjusting the tension on the four external screws and swapping to thicker or thinner rubber spacers. Once you have dialed in your preferred retention, applying blue Loctite to all threads is highly recommended to prevent the hardware from backing out over time.

Printing & Customization Tips

  • Choose the No-Hole File: I recommend downloading the STL version without pre-made holes. Because hole sizing and spacing vary significantly between different clip brands, this gives you the flexibility to map the holes exactly to your hardware.

  • Adding Holes: You can easily add custom holes in your slicing software before printing, or print the solid model and carefully drill them out afterward.

  • Clearance Warning when mounting the holster clip: Whichever method you choose, ensure you use low-profile holster nuts. If the nuts protrude too far into the interior of the carrier, they will drag against the magazine and ruin your retention adjustment. If your screws are too long, they can also protrude past the nut and press against the magazine. 

  • Print settings and Material: This can be printed in any material, though I recommend ASA for the best longevity. Carbon fiber and fiberglass reinforced filaments is not recommended because you will be wearing this against your skin for extended periods of time. 

  • 100% infill, auto organic supports.

Tagi