Dodge Neon HVAC Knob Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For second generation Dodge Neon (& SRT4) HVAC knob phone holder includes 15mm ball joint.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A phone holder using the HVAC cluster air circulation knob on a second generation Dodge/Chrysler Neon including R/T and SRT4 models 2001 - 2005.
You will lose the ability to switch between the air circulation modes although will be permanently set to intake outside air. (These car's HVAC systems aren't that great to begin with that it would really matter)
The "arm" is angled roughly 4-o-clock to the driver side for the perfect glancing angle of a device.
Do not insert the stem piece alone, you'll get it jammed and require disassembling your HVAC cluster to remove it. Designed to be a tight fit and to self clearance itself after a few drives on moderately bumpy roads.
Hardware required:
2 qty M3 8-10mm long pan head bolts
2 qty hot melt inserts M4 diameter (M3 thread size)
1 qty hot melt insert M4 thread size
1 qty M4 hex bolt no longer than 15mm
Also included is a 15mm ball joint stud for Scosche Branded Magnetic mounts (Scosche Magicmount).
PETG or higher heat resistant material is a must in the summer. (I used PETG white from Sunlu, been holding up for 3 years now)