Pioneer PL-518 Turntable Replacement Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for a vintage Pioneer PL-518 turntable.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement foot for a vintage Pioneer PL-518 turntable. It's roughly modeled after the ones sold by Mnpctech and should fit other vintage PL-series turntables using the same style feet. These are meant to use the factory screws.
I opted to use TPU to hopefully give these a little better vibration dampening since they aren't spring loaded like the factory ones, but you can theoretically print them out of whatever material you like. Perhaps stick a felt or rubber pad on the bottom so they don't slide around.
Print Settings
Printer: Voron 2.4R2 250
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 15 - 20%
Filament Material: TPU