Pioneer PL-518 Turntable Replacement Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement foot for a vintage Pioneer PL-518 turntable.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement foot for a vintage Pioneer PL-518 turntable. It's roughly modeled after the ones sold by Mnpctech and should fit other vintage PL-series turntables using the same style feet. These are meant to use the factory screws.
I opted to use TPU to hopefully give these a little better vibration dampening since they aren't spring loaded like the factory ones, but you can theoretically print them out of whatever material you like. Perhaps stick a felt or rubber pad on the bottom so they don't slide around.
Print Settings
Printer: Voron 2.4R2 250
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 15 - 20%
Filament Material: TPU