Nordic Ski Wax Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table mount to clamp your skis down for waxing [your skis].
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is designed for 4mm rod such as this one:
https://www.amazon.com/dp/B07SYYDTVZ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
If you can cut the rod, a single rod about 150mm or longer will be enough for the entire assembly.
The center clamp area also uses 4mm rods to stabilize and guide the upper assembly. I put 2 holes in it, but using 1 seemed secure enough and the assembly bound less when travelling.
M3 screws and nuts for everything else on the assembly.
I used furniture pads on the end supports to protect the top of the skis and stabilize everything. Here's what I used (I trimmed it down about 5mm).
https://www.amazon.com/dp/B06XG8GHYD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
I put notches in the center of the assembly to align the supports and clamps along a single line.