Nordic Ski Wax Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Table mount to clamp your skis down for waxing [your skis].
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
This is designed for 4mm rod such as this one:
https://www.amazon.com/dp/B07SYYDTVZ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
If you can cut the rod, a single rod about 150mm or longer will be enough for the entire assembly.
The center clamp area also uses 4mm rods to stabilize and guide the upper assembly. I put 2 holes in it, but using 1 seemed secure enough and the assembly bound less when travelling.
M3 screws and nuts for everything else on the assembly.
I used furniture pads on the end supports to protect the top of the skis and stabilize everything. Here's what I used (I trimmed it down about 5mm).
https://www.amazon.com/dp/B06XG8GHYD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
I put notches in the center of the assembly to align the supports and clamps along a single line.