Securing nut for Beluga child swing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for a lost securing nut of a child swing
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 2
- Wyświetlenia
- 217
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We bought a used swing for our baby but one of those tightening nuts was missing. I designed a new one and it fits just perfectly! If you´re unsure if it fits your swing, these are the thread dimensions:
Thread lead: 7 mm, Inner Diameter (nut): 20,2 mm, Outer Diameter (nut): 24,2 mm
I printed it in FormFuturas ApolloX, a modified ASA. Perfect for outdoor-use and the colour fits also.
Printed with a 0.6 mm nozzle, so any smaller one will do it too. I can´t guarantee for bigger nozzles, because you need a small layer height to get a nice thread.
Further settings i used:
-0,2 mm layer height
-5 perimeters with a 0.6 nozzle, (~3 mm)
-2 mm top and bottom thickness
-30 % Gyroid Infill
I know it´s a lot, but i wanted a part that will last a long time. The print duration was just 2,5 h.
Happy swinging :)