Securing nut for Beluga child swing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement for a lost securing nut of a child swing
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 2
- Views
- 217
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We bought a used swing for our baby but one of those tightening nuts was missing. I designed a new one and it fits just perfectly! If you´re unsure if it fits your swing, these are the thread dimensions:
Thread lead: 7 mm, Inner Diameter (nut): 20,2 mm, Outer Diameter (nut): 24,2 mm
I printed it in FormFuturas ApolloX, a modified ASA. Perfect for outdoor-use and the colour fits also.
Printed with a 0.6 mm nozzle, so any smaller one will do it too. I can´t guarantee for bigger nozzles, because you need a small layer height to get a nice thread.
Further settings i used:
-0,2 mm layer height
-5 perimeters with a 0.6 nozzle, (~3 mm)
-2 mm top and bottom thickness
-30 % Gyroid Infill
I know it´s a lot, but i wanted a part that will last a long time. The print duration was just 2,5 h.
Happy swinging :)