V-ION (TZ-2.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the version made by Nefroh_3322102 but I wanted zero heat inserts and wanted to be able to use the stock nozzle.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was inspired by the version made by Nefroh_3322102 and so I made my own version with a few changes I wanted.
-Zero heat inserts so they have all been removed.
-Made it work with a stock TZ 2.0 as with theirs it needed a v6 nozzle and wasn't in the same place as the original hotend.
-I like the 2510 fan so the original 3010 has been changed to a 2510 fan.
-Changed the countersunk M3 screw to a button head as I didn't want to go out and get a single M3 when I have a bunch of button heads laying around (use a 4mm).
-Beveled a few of the holes here and there.
-Removed the PTFE coupling as I'm fine just sticking the PTFE into the top like the Stealth Burner.
I have a couple future plans including support for other hotends, a filament cutter, and a tool changer version much like how INDX works (this is pretty far down the road but I will post updates in the RH3D discord when work starts and throughout the process).
