V-ION (TZ-2.0)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I liked the version made by Nefroh_3322102 but I wanted zero heat inserts and wanted to be able to use the stock nozzle.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 17
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was inspired by the version made by Nefroh_3322102 and so I made my own version with a few changes I wanted.
-Zero heat inserts so they have all been removed.
-Made it work with a stock TZ 2.0 as with theirs it needed a v6 nozzle and wasn't in the same place as the original hotend.
-I like the 2510 fan so the original 3010 has been changed to a 2510 fan.
-Changed the countersunk M3 screw to a button head as I didn't want to go out and get a single M3 when I have a bunch of button heads laying around (use a 4mm).
-Beveled a few of the holes here and there.
-Removed the PTFE coupling as I'm fine just sticking the PTFE into the top like the Stealth Burner.
I have a couple future plans including support for other hotends, a filament cutter, and a tool changer version much like how INDX works (this is pretty far down the road but I will post updates in the RH3D discord when work starts and throughout the process).
