TFT70 - Display Housing - Desktop stand & 20 Series Aluminium Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gehäuse für ein TFT70 Display - als Tischstand oder zum einhängen in Aluprofile 20mm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hier ein Gehäuse für ein BTT TFT70 Touch Display das ich an meinem Eigenbau Drucker verwende. Dieses Gehäuse kann zum einen einfach auf den Tisch abgestellt oder auf ein 20mm AluProfil aufgesteckt werden. Somit ist man sehr flexible und kann es auch in der Hand halten zur Bedienung, wenn man z.B. beim Einrichten etwas anfahren will.
Zur Montage benötigt Ihr M3 Schrauben und M3 Einschmelzmuttern und natürlich das BTT TFT70 Display in der Marlin Version.
Auf der Vorderseite habt Ihr unterhalb des Drehknopfes einen funktionsfähigen Reset-Taster. Dieser ist schwergängig genug um Ihn nicht aus versehen zu drücken, lässt sich aber gewollt sehr gut betätigen.
Bei der Montage wird das Display eingelegt und zusammen mit den Standfüßen verschraubt. In den Stand füßen sind TPU Einsätze auf der Unterseite sowie in der Aussparung für das Alu Profil eingesteckt. Diese verhindern das verrutschen auf dem Tisch und geben sicheren Halt auf dem Alu Profil. Die TPU Einsätze müssen nur in die Nut eingeschoben werden und halten von alleine. Es wird kein Kleber benötigt. In den Standfüßen ist außerdem noch eine Kabelführung integriert, hier könnt Ihr das Kabel dann einfach mit einem Kabelbinder befestigen um so ein Zugentlastung zu schaffen. Ich habe als Zuleitung ein Ölflex 5x0,5² Kabel verwendet, was sehr gut funktioniert.
Ebenfalls mit dabei ist eine Endkappe für ein 2020 Aluprofil, welche nicht zwingend notwendig ist aber zum einen besser aussieht und zusätzlichen Schutz gegen herunterfallen des Displays bietet. Je nachdem wie Ihr das bei Eurem Projekt umsetzt.
Das Gehäuse sowie die Füße habe ich in PETG-CF gedruckt und die TPU Einsätze aus einem TPU 83A.
Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen.
Here is a housing for the BTT TFT70 touch display that I use on my custom-built printer. This housing can either be placed simply on a table or mounted onto a 20mm aluminum profile. This offers great flexibility, allowing you to hold it in your hand while operating it—for example, when jogging the axes during setup.
For assembly, you will need M3 screws, M3 heat-set inserts, and, of course, the BTT TFT70 display (Marlin version).
On the front, below the rotary knob, there is a functional reset button. It has enough resistance to prevent accidental presses but is easy to operate intentionally.
During assembly, the display is inserted and screwed together with the feet. TPU inserts are fitted into the underside of the feet as well as into the slot designed for the aluminum profile; these prevent slipping on the table and ensure a secure grip on the profile. The TPU inserts simply slide into the grooves and stay in place on their own—no glue is required. A cable guide is also integrated into the feet, allowing you to secure the cable with a zip tie to provide strain relief. I used an ÖLFLEX 5x0.5mm² cable for the connection, which works very well.
Also included is an end cap for a 2020 aluminum profile; while not strictly necessary, it looks better and offers extra protection against the display falling off, depending on how you implement the setup in your project.
I printed the housing and feet using PETG-CF and the TPU inserts using TPU 83A.
Have fun printing! If you like the model, I would be happy if you leave me a like