1 / 1
XShot Longshot Angled Grip — zdjęcie 1

XShot Longshot Angled Grip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An angled grip for the XShot Longshot (1.0 and 2.0) Nerf-type dart blaster

Ocena
0 / 5
Polubienia
5
Pobrania
52
Wydruki
0
Wyświetlenia
236
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution

An angled grip for the XShot Longshot with a notch for the index finger to help prime stronger springs.

Works on both 1.0 version and 2.0 version.

The plastic roller from the original handle is reused (not mandatory, but helps against twisting the loading bars).

Printing:

A full lower layer is not required, but give the sides few more walls and a somewhat dense infill for strength (I used 5 walls and 15% cubic infill for all-around strength).

Assembly:

Requires four M3x20mm bolts and M3 nuts.