1 / 1
XShot Longshot Angled Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An angled grip for the XShot Longshot (1.0 and 2.0) Nerf-type dart blaster
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 52
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
An angled grip for the XShot Longshot with a notch for the index finger to help prime stronger springs.
Works on both 1.0 version and 2.0 version.
The plastic roller from the original handle is reused (not mandatory, but helps against twisting the loading bars).
Printing:
A full lower layer is not required, but give the sides few more walls and a somewhat dense infill for strength (I used 5 walls and 15% cubic infill for all-around strength).
Assembly:
Requires four M3x20mm bolts and M3 nuts.