MANCALA GAME BOX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is Mancala Game Box, to have full game you need only some stones or balls (48 for classic game variant)
- Ocena
- 1 / 5
- Polubienia
- 17
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is Mancala Game Box, to have full game you need only some stones or balls (48 for classic game variant). You can print some irregular stones 10-12 rough diameter - better than balls - balls are slippery.
15% fill is enough but you need to be cautious with screws and magnet mounting.
30% recommended and 3-4 external walls (for easy screws and magnet mounting).
Supports not needed.
Need to print 2 pieces of BOX and 2 pieces of HINGE - see photo
Made with Spectrum PLA Pro serves well - multiple games already played.
You need 2 magnets 20/10/2mm with long thin side as magnet direction.
You also need 4 pieces of M3 screws 20-40 mm long - use screws with partial thread.