MANCALA GAME BOX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Mancala Game Box, to have full game you need only some stones or balls (48 for classic game variant)
- Rating
- 1 / 5
- Likes
- 17
- Downloads
- 44
- Makes
- 0
- Views
- 228
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is Mancala Game Box, to have full game you need only some stones or balls (48 for classic game variant). You can print some irregular stones 10-12 rough diameter - better than balls - balls are slippery.
15% fill is enough but you need to be cautious with screws and magnet mounting.
30% recommended and 3-4 external walls (for easy screws and magnet mounting).
Supports not needed.
Need to print 2 pieces of BOX and 2 pieces of HINGE - see photo
Made with Spectrum PLA Pro serves well - multiple games already played.
You need 2 magnets 20/10/2mm with long thin side as magnet direction.
You also need 4 pieces of M3 screws 20-40 mm long - use screws with partial thread.