1 / 1
Angled Furniture Leg Bracket / Scandi Chair Repair (M10 Thread)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed in PETG. 5 perimeters, 30-50% Gyroid infill for maximum strength. No supports needed. Has a 14.4mm pocket for M1
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1.1 + General Attribution v1
Angled mounting bracket for scandinavian-style kids chair leg repair.
Features:
- 15-degree leg tilt angle for maximum chair stability.
- Integrated 14.4mm bottom pocket to securely fit an M10 nut.
- Reinforced screw holes for tight furniture mounting.
Recommended Print Settings:
- Material: PETG (for durability and flexibility)
- Perimeters (Walls): 5 or 6
- Infill: 30% to 50% Gyroid
- Supports: Not needed (print flat side down)
