Husky Electric Pump Adapters for Husky Fromy 5 & Outwell Sleepin Double 5.0cm mats
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom adapters connecting a Husky electric pump to Husky Fromy 5 & Outwell Sleepin Double 5.0cm mats
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Tired of inflating sleeping mats by mouth and introducing moisture to the internal foam, or struggling with generic pump nozzles that pop out under pressure?
This project provides custom, friction-fit nozzle adapters designed to seamlessly connect a Husky compact electric pump to self-inflating sleeping mats—specifically tailored for the Husky Fromy 5 and the Outwell Sleepin Double 5.0 cm. Whether you need to top off your mattress for maximum firmness or vacuum-deflate it quickly to fit back into its carry sack, these adapters ensure a tight, hands-free seal.
📦 Included Adapters
Husky Fromy 5 Adapter: Custom-fitted nozzle for a precise fit into the Husky Fromy 5 valve mechanism.
Outwell Sleepin Double 5.0 cm Adapter: Engineered specifically to clear the double valve setup on the Outwell Sleepin series and stay firmly in place during inflation.
🔥 Key Features
Tailored Fit: Precision-engineered to match the specific valve diameters and depths of both sleeping pads, preventing air leaks during use.
Ribbed Retention Barbs: Subtle ridges on the insertion end grip the inside of the mat valves securely so the hose won't detach under pressure.
Optimized Airflow: Includes an internal cross-bridge design to depress internal one-way valve flaps without restricting air passage.
Dual-Purpose: Attach to the pump's exhaust port for rapid inflation, or switch to the intake port to suck out remaining air for effortless packing.
🛠 Recommended Print Settings
Material: PETG is strongly recommended for its optimal balance of layer adhesion, outdoor temperature resistance, and slight flexibility that aids in creating an airtight seal against the valve. PLA or ASA will also work.
Layer Height:
0.15 mm–0.20 mm(finer layers create a smoother outer surface for a superior seal).Wall Loops / Perimeters: 3 to 4 walls (crucial to ensure the part is completely airtight and does not leak through the infill).
Infill:
15% – 20%(Gyroid or Grid).Orientation: Print vertically on the flat base (pump-connection side down) for maximum Z-axis strength and clean cylinders.
Supports: None required when printed in the standard vertical orientation.
💡 Usage Tips Push the adapter firmly onto your Husky pump, insert the tapered end into the sleeping pad's valve, and power on. If normal printer tolerances or filament shrinkage result in a fit that feels slightly too loose, wrapping a single layer of PTFE (Teflon) plumbing tape around the adapter base will provide an instant, permanent gasket seal.