1 / 7
Mezz 1 Parts Remix — zdjęcie 1
1 / 7

Mezz 1 Parts Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just messed with the original model to make spaces in the club for tire weights, a cover plate, and a front face.

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I printed in PETG and used a scrap piece of 6.25mm metal I had lying around the  shop for the face. With every space filled with tire weights and the metal face it has a good weight and feels balanced with a spare shaft I took from an old club and a super stroke grip. Will be trying it on the course tomorrow morning.

Print Settings

I recommend PETG or a CF filament if you are able to print it. 

  • 50% infill or more

  • 0.2 layer height

  • Textured PEI plate

  • Faceplate in PETG, Metal Plate, or TPU would even work for a bit of spring.

  • Faceplate 100% infill

  • Baseplate 100% infill

  • Supports for the main body only

Here are links to the weights and screws I used but you can use anything that works. I even used cut off pcs of rebar as weights in the early versions.

https://www.amazon.com/dp/B06XDHXRT7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

https://www.amazon.com/dp/B0DCZJG2GM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Have fun! and thanks to Printshed Designs for the base model use!

Update - added pic of the weights in the bottom

Tagi